|Mon – Thu||7:30 am – 5 pm|
|Fri||7:30 am – 4 pm|
|Sat||9 am – 12 noon|
Reisser R2 Cutter Woodscrew - Countersunk YT Pozidrive 4.5mm Craft (200) - Craft45CUT
Priced PER BOX Please ORDER in BOX QUANTITIES
ALL SIZES of 4.5mm are PACKED in 200's
R2 CUTTER Woodscrew Countersunk BZP Hinge Craft Pack 4.5mm
from Mercer & Sons Fastenings Blackburn Lancashire.
Mercers can supply all your fastening requirements and Architectural Ironmongery Direct from Lancashire.
The R2 Cutter is ideal for working close to the edge of the timber and board materials as the cuts on the thread help to reduce splitting dramatically.
The ribs and tucks allow the screw to self-countersink flush without countersinking beforehand
Very sharp 25deg point with the thread running to the end allowing immediate starting
NO need to 'pre-start'
The sharp,wide,deep thread penetrates into all timbers WITHOUT a pilot hole,giving exceptional pull-out
Specially hardened steel gives the R2 maximum tensile and torsional strength
Full thread up to 50mm generally part thread on longer sizes
The invisible Reisser lubricant helps the screw drive in quickly and easily
The re-inforced collar under the head gives additional support preventing snapping
The collar also allows a wide,deep pozi to be inserted
This reduces the risk of the bit jumping out and rounding off the edges
Each batch is checked thoroughly to guarantee quality consistency
Yellow tropicalized giving approximately 20 times more rust risistance than standard BZP screw
There are no reviews yet.